the SATABOY finally finished its RAID6 build at 15:00. Dan noticed that the spare 2TB SATA drive was configured as a global spare for the 64GB SSD drives as well! So we removed it from the global spare pool and added it to the SATA RAID pool only. I connected the Sun X4270 (frame writer) fibre channel cards to the sataboy controllers. There are two FC cards in the Sun and two controllers, so the connection is: sun pci-e slot1 to controller 0 (left connector) sun pci-e slot4 to controller 1 (left connector) I've handed the system over the DCS for QFS install. Dave, Greg, Dan