All of the SDF monitors are now cleared (show no diffs) except the SUS SR3.  As stated in alog 18777 SR3 has optical lever feedback enabled for stability purposes.  Since this is new we will keep it on the DIFF list until it proves itself helpful.  See attached for snapshot of the 2 OK DIFFs on SR3.  OPS will need to open the TABLE in order to see that these 2 DIFFs are the same as the snapshot, and no more, no less.

During the cleaning house, we also updated the comparison snap files on SDFs of the following since there were models/database changes made over the last month+:

IOPSUSEX

IOPSUSEY

IOPSEIH16

OMC

OAF