Just before setting the intent bit for the current lock stretch, Patrick, Kiwamu and I looked at SDF.  A few red alarms needed attention.  We set SDFs:

• H1:LSC-TR_X_NORM set to be not MON, since GRD manges this channel.
• ACCEPTED SR3 M2 OPLEV damping loop arrangement revised by Sheila yesterday - see snapshot of what values were accepted.
• OMC DITHER button was ON, turned button OFF since actually no EXC was happening.  Likely left over from work last night.
• SRM and PRM had gains changed to zero in the LOCK L loop that is unused.  We set these to -0.02 as that was what SDF was expecting.  Again, loops are off so no functional change.