To test the power-up status of the SUS HWWD, I activated the SUS ITMY HWWD which is located in the CER SUS-C6 rack. The long DB-37 cables which run from the ITMY M0 OSEMS were not connected to the monitor ports of the HWWD. I found the cables on the top of the rack, and after verifying they were connected to the monitor ports of the satellite amps for ITMY M0 (located in the LVEA beer garden) I plugged them into the HWWD.

After the tests were completed, I disconnected the cables in the CER and returned them to the top of the rack.