Reports until 09:56, Thursday 25 June 2015
H1 CDS
patrick.thomas@LIGO.ORG - posted 09:56, Thursday 25 June 2015 - last comment - 14:05, Thursday 25 June 2015(19320)
Moved BPG402-SE at end X to output of photodiode chassis, chassis 3 removed 
Filiberto, Patrick

Filiberto moved the cable for the gauge and I made the update to the system manger, committed it into svn, and activated it.

Filiberto then removed chassis 3 for his work on it. I disabled that chassis and the one following it in the target system manager, activated and ran that configuration. I have not restarted the PLCs because I am not sure they will run without the missing chassis. The gauge appears to still be operating however, as it does not need a PLC program.

So the end X Beckhoff PLCs are not running while Filiberto works on the chassis.
Comments related to this report
patrick.thomas@LIGO.ORG - 14:05, Thursday 25 June 2015 (19326)
Link 

Filiberto reinstalled the modified chassis. I updated the system manager accordingly, committed the change to svn and activated it. I had to reboot the computer in order to get PLC2 to run. I burtrestored to 6:10 this morning.

It is back up and running again.