(Corey, Hugo, Jim, Mitch)

Assy #3

• Removed Large Masses (iLIGO Leg Elements)
• Installed Lifting Brackets for when we are ready to pull out this assembly.

For all intents and purposes, this Assembly is ready to be pulled off the Test Stand.

Assy #1

• Connected Actuators to Stage-0
• Reamed out holes for CPS Target Mounts & then mounted/aligned Vertical CPS (Capacitive Position Sensors).  Once again, the locations of all of the CPS's for this Assy is in this elog.
• Run dirty cables from Assy#3 to Assy#1
• Ran quick check spectra on GS-13s (to ensure they are operational post-move from Assy#3)
• Outer Walls installed
• In-Vac cabling run