Joe, Matt, Sheila, Dave:

We have used Joe B's latest PI_MASTER file to build h1susetmxpi and h1susetmypi. The master puts the DEMOD I,Q channels into the commissioning frame at 2kHz. If we try to run this model, we get the "DAQ too small" error. Rolf says that channels must be added to the DAQ at the native rate (64kHz) to remove this error. We put in two fast channels on the top level (we tried with one, but it looks like there must be at least two). To reduce these channels impact on the commissioning frame, I made these testpoint parts with an input of ZERO, which should be effectively removed by compression.

Matt and Sheila requested that the data rate for the DEMOD be increased from 2kHz to 4kHz, this was done.

After the models were restarted, the DAQ was restarted. h1dc0 did not autostart its daqd process, we had to do this by hand.