(Jenne, Fil)

The slow controls interface for the EOM drivers is now up and running. The attached screen shot shows the remote controls screen. RF power can be adjusted between 4dBm and 27dBm in 0.2dB steps. On the unit the remote switch must be set to External, the excitation switch be set Off and the RF power switch to On. 

Fast channels are available under H1:LSC-MOD_RF9/45_AM with filter modules ERR, CTRL (in loop), AC and DC (out of loop).

Cables have been pulled to the PSL, but the unit we have is not connected yet.