Darkhan, Craig, Sudarshan
We took DARM Open Loop Transfer function and Pcal sweep one after each other.
We had a hard time keeping the ETMY ESD from saturating at frequencies above 800 Hz and at the same time obtaining reasonable coherence. So this measurement is good only below 800 Hz and upto 7 Hz. The calibration lines are turned back on after the measurement was done. (At around 2015-08-26 5:05:00 UTC).
Attached is DTT screenshot of both the measurement 1. DARM OLGTF, 2. Pcal2DARM TF and conlog file that contains filter information during the time of measurement.
Analysis to follow.