Log:

• 1500 (800 PST) - IFO --> DOWN
• 1503 - Bubba starting Grouting, he will be going in and out of the southwest door of the South Bay.
• 1504 - Karen rolling up receving bay door
• 1515 - Karen/Christina heading to ends to clean
• 1519 - Peter to Diode room to turn on laser WD on the PSL Beckhoff computer
• 1520 - Patrick restarting Conlog
• 1520 - Peter back
• 1526 - Ken in the MSR to repair UPS
• 1531 - Jim B starting Frame writer work (fw0 & fw3)
• 1534 - Elli taking the IFO to measure SRC Gouy phase
• 1541 - UPS back up and running
• 1616 - Karen/Christina going from EX to EY
• 1616 - Dick G to Optics Lab
• 1626 - Kiwamu transitioning LVEA to laser SAFE
• 1626 - Jeff K to LVEA to pick up some electronics
• 1630 - Jordan/Vinny to EY switching magnetometer filter box
• 1633 - Jim B starting fw1
• 1636 - Ken to LVEA to talk to Bubba
• 1637 - Jeff K out of LVAE
• 1640 - Elli done (because we switched to laser SAFE)
• 1645 - Betsy starting EX charge measurements
• 1650 - Jeff K to EY for UIM measurement
• 1708 - Karen/Christina done with ends
• 1712 - Ken to Y28
• 1712 - Kyle to EX to replace annulus ion pump
• 1716 - Fil/Andres to X vault to look at PEM channels
• 1724 - Jim W BS exc
• 1730 - Jodi to LVEA for 3IFO whatnots
• 1745 - Jim W done
• 1748 - Jordan/Vinny to EX to swap magnetometer filter box
• 1803 - Jodi out
• 1825 - Jordan/Vinny back
• 1832 - Jodi to LVEA to look for function generator
• 1835 - Ken back
• 1850 - Jeff K done at EY
• 1853 - Jodi out
• 1900 - Betsy starting EY charge measurements
• 1911 - Dave restarting Cal/OMC models (the Duotone work)
• 1920 - Bubba/Chris out
• 1931 - Keita/Sheila into PSL to swap PZT LPF
• 2021 - Keita/Sheila out of PSL and done with PZT peri LPF
• 2021 - Nutsinee starting HWS realignment
• 2109 - Nutsinee done
• 2123 - Sheila into the CER
• 2142 - Sheila out of the CER
• 2151 - Kyle done at EX
• 2152 - Start of Locking
• 2208 - Initial alignment

Handing off to Jeff B trying to lock DRMI_1F.

Longer maintenance Day, but no huge surprises.