Starting from 1128187392 GPS, the DCS (LDAS) rds frames (frame-type H1_RDS) were updated to include all the channels needed by gstlal_compute_strain to calibrate the data:

H1:CAL-DARM_CTRL_WHITEN_OUT_DQ
H1:CAL-DARM_ERR_WHITEN_OUT_DQ
H1:CAL-PCALY_RX_PD_OUT_DQ
H1:CAL-CS_LINE_SUM_DQ
H1:CAL-CS_TDEP_DARM_LINE1_REF_A_TST_REAL
H1:CAL-CS_TDEP_DARM_LINE1_REF_A_TST_IMAG
H1:CAL-CS_TDEP_DARM_LINE1_REF_A_USUM_REAL
H1:CAL-CS_TDEP_DARM_LINE1_REF_A_USUM_IMAG
H1:CAL-CS_TDEP_DARM_LINE1_REF_A_USUM_INV_REAL
H1:CAL-CS_TDEP_DARM_LINE1_REF_A_USUM_INV_IMAG
H1:CAL-CS_TDEP_REF_CLGRATIO_CTRL_REAL
H1:CAL-CS_TDEP_REF_CLGRATIO_CTRL_IMAG
H1:CAL-CS_TDEP_PCALY_LINE2_REF_C_NOCAVPOLE_REAL
H1:CAL-CS_TDEP_PCALY_LINE2_REF_C_NOCAVPOLE_IMAG
H1:CAL-CS_TDEP_PCALY_LINE2_REF_D_REAL
H1:CAL-CS_TDEP_PCALY_LINE2_REF_D_IMAG
H1:CAL-CS_TDEP_PCALY_LINE2_REF_A_TST_REAL
H1:CAL-CS_TDEP_PCALY_LINE2_REF_A_TST_IMAG
H1:CAL-CS_TDEP_PCALY_LINE2_REF_A_USUM_REAL
H1:CAL-CS_TDEP_PCALY_LINE2_REF_A_USUM_IMAG
H1:SUS-ETMY_L3_CAL_LINE_OUT_DQ
H1:CAL-CS_TDEP_REF_INVA_CLGRATIO_TST_REAL
H1:CAL-CS_TDEP_REF_INVA_CLGRATIO_TST_IMAG
H1:ODC-MASTER_CHANNEL_OUT_DQ
H1:CAL-DELTAL_CTRL_TST_DQ
H1:CAL-DELTAL_CTRL_PUM_DQ
H1:CAL-DELTAL_CTRL_UIM_DQ
H1:CAL-DELTAL_RESIDUAL_DQ
H1:CAL-DELTAL_CTRL_DQ

Some of the faster channels were already in the rds frames. This increases the rds data rate from ~2.1 MB/s to ~2.2 MB/s

The same changes was made at LLO, with H1->L1.

The H1 and L1 DCS (LDAS) rds channel list are here:

http://www.ldas.ligo-wa.caltech.edu/ldas_outgoing/createrds/channels_H1_RDS/channelList-O1-H1_RDS.txt
http://www.ldas.ligo-la.caltech.edu/ldas_outgoing/createrds/channels_L1_RDS/channelList-O1-L1_RDS.txt