If I remember correctly:
h1ecatc1 was running but had some terminals in the INIT ERR state.
h1ecatx1 was white on the CDS overview.
h1ecaty1 was still running and all terminals were in the OP state.

For h1ecatc1, h1ecatx1 and h1ecaty1:
Opened the system manager from the target directory.
Activated the configuration and restarted in run mode.
Opened each PLC from the target directory.
Logged in and ran it (if it was not already running).

I believe I also restarted the EPICS IOC on h1ecatx1.

Burtrestored all to 5:10 this morning.