The wind has calmed significantly (20 mph seems reasonable after the past few days), but microseism remains very high (centered around 0.6 um/s).  Miraculously, I made it to Observing with little issue other than some slight tweaking of the ETMs (no full initial alignment was performed). 

Steps to Observing:

• Cleared ETMy timing error at 0:13 UTC before attempting to lock.  Jeff and I noticed this had popped up at the end of his shift.
• Called Kissel about the O1 CDS Overview screen no longer showing a red box for EXC.  We walked through verifying that the lines were in fact running, and after checking the old CDS Overview screen, I saw that it showed the EXC box as purple as expected.  I'm not sure why the O1 CDS overview screen no longer shows the H1CALCS EXC box red.
• Called Keita (on-call commissioner) to go over some SDF diffs I had not seen before.  See attached screenshots for lists of the SDF diffs.  On his advice after digging through some aLogs, I reverted the ASC-ADS diffs, and accepted the DHARD gains and ETMy gains.  We're not sure why the ASC-ADS channels showed diffs, but it could possibly be related to a failed A2L script run mentioned in aLog 23003. 
• Observing Mode at 2:44 UTC.

Keita also advised to keep an eye on the DHARD loops for a 0.6 Hz oscillation as described by Kiwamu in aLog 22871.  These diffs have been accepted several times in the past week without issue, but it is something to keep in mind.