came in today to find ISI HAM2,3 models each have a single CRC DAQ error as reported by the data concentrator (this is calculated 16 times a second). I found that these numbers are not trended anywhere, so I'll open an ECR to add them to the DAQ. I know that all the CRCs were zero when I left at 18:00 last night.

Note to operators, if you see CRC errors on the new CDS O1 Detail screen not related to restarts please alog this. TJ tested the new "!DAQ Clear Accumulated CRC" button when H1 was not in observation mode to clear them.