Returned ETMy, ITMy, & TMSy to state they were before last lockloss (by using the M0 & M1 DAMP p/y INMON values & using sliders to return SUS to these values).  

Still have issue of not being able to get ALSy power over 0.5.  The best I could do was actually up to 0.65 with a 0:1 mode (I changed trigger threshold to 0.8), but as soon as I took the threshold down to 0.5, the WFS engaged and drove the alignment off (not surprisingly since what they had was a bad 0:1 mode).

I have had zero luck at getting a 0:0.  Not sure what other knob I can turn to help me get out of this bad alignment hole.