Discussed IFO status:
-
TJ mentioned issue with OMC locking on carrier last night.
-
Blend filters and a study. implementing 45mHz appeared to help. This is another data point; can we get a protocol established from studying this & other data points?
-
Input Alignment pointing, are we happy with the restore we did over the weekend?
-
0.6Hz spike at HAM3 revisited last week
-
Discussed the lockloss related to tidal on Sat night. Hugh mentioned wanting to look at some of his channels.
Substem Reports: Nothing for SEI, SUS, CDS, FACILITIES
Maintenance Activities Tomorrow:
-
TCS/polarization characterization, measurement set-up (oberling)
-
reconfig Y-End garbing station (bartlett)
-
restart HAM3 ISI restart? probably not
-
finish connections/cabling for end station vacuum gauges (EX/EY)
-
71Mhz signal investigation out on floor for CPS sychro for all chambers
-
TCS shut off to install safety switches (might hold off until after oberling
-
EX & EY vea to compressor room, finish routing high V cable
-
x28/y28 generator running, move generator from x28 to y28
-
Possible LN2 delivery
-
refcav alignment adjustment (King, oberling)
-
rock delivery, balers to pick up bales (bubba)
-
DARM OLTF + PCAL z DARM TF
-
Went over Work Permits