Reports until 10:41, Saturday 12 December 2015
H1 PSL
thomas.shaffer@LIGO.ORG - posted 10:41, Saturday 12 December 2015 (24149)
Added 200mL to Diode Chiller bottom

I was having issue keeping the IMC locked, I looked at the PLS status and the chiller alarm was red. I went in to check it out and the bottom of the chiller was in error with "Low Level", the top seemed to be hovering around the Max line. I am not sure if the bottom is seperate from the top, but I added 200mL of water to the bottom. Alarms all good now.