Cheryl, DavidJ and Craig did the fit check of in-chamber TMS restraint and they say it fits OK.

I have confirmed that we have all neccesarry parts for the TMS transport safety stop. I didn't actually install the thing (I cannot do that until ISI and initial alignment test are both done), but I checked the length of the hook-rod-turnbuckle-rod-pin assembly (there are three types) and they seem to be right. The hook is almost too small for the eyebolts we have. It's sometimes ridiculously difficult to fit correctly, but it's doable.

Unfortunately we couldn't test the ISC table cover. We need to talk to Joe to see if it's out of oven or not.

All in all, we're in a good shape.