Displaying report 1-1 of 1.
Reports until 01:04, Thursday 28 January 2016
H1 ISC
evan.hall@LIGO.ORG - posted 01:04, Thursday 28 January 2016 (25219)
CER EOM driver powered off

While in the CER preparing for some oscillator coupling measurements, I noticed that the spare EOM driver had its input turned off, and the power supply was in standby mode. Since the input switch was turned off, I assume this was intentional and followed the instructions on the sticky note for unplugging the input from the distribution amplifier.

Displaying report 1-1 of 1.