First thing this morning, the Apollo crew headed down to Y-end to remove the man-lift that Dale used for filming the install. The engine hoist was moved from the northwest corner of the chamber cleanroom to a spot by the termination slab. 

In addition, the following items were agreed upon in a brief meeting:
-Remove jacks from chamber cleanroom (~03 April 2012, Apollo)
-Move SEI masses to E-module (~03 April 2012, Apollo)
-Remove loose vacuum line (~03 April 2012, Kyle)
-Move test stand to termination slab (~03 April 2012, Apollo)
-Assemble and customize cart for IAS (~06 April 2012, Jodi/Apollo)
-Remove CPStat from Test Stand cleanroom (At Bubba's discretion)
-Reinstall curtains on Work Space cleanroom (At Bubba's discretion)
-Move garbing/staging cleanroom to southeast corner of chamber cleanroom (At Bubba's discretion)
     *Note-This will clear the way for setting the ISCT table.
-Move TS and WS cleanrooms back into usable configuration (At Bubba's discretion)
-Re-clean cleanrooms (~05 April 2012, Tech Cleaning Crew)
-Remove appropriate port covers from south door (At Bubba's discretion)
     *Note-Need info from ISCT to make an informed decision.