.HIGH Alarm Levels Changed for FMCS Air Handlers

Had a few FMCS alarms this week due to warmer temps and changes to heaters.  The MAJOR alarms occured when H0:FMC-CS_LVEA_REHEAT_1B_DEGF went above 100degF.  John said we should bump this up to 110degF, so I went ahead and updated the burt.snap for h0fmcs.snap.  I changed all the H0:FMC-*_REHEAT*_DEGF.HIGH from 100 to 110.  To do this:

• cp /ligo/cds/lho/h0/burt/2016/02/19/14:00/h0fmcs.snap /ligo/home/corey.gray/h0fmcs.snap.copy
  • Made edits to this file in my home directory & saved it
• Dave did the following from my home directory:  burtwb -f h0fmcs.snap.copy
  • This wrote the new file to the running copy.
  • At the top of the hour we saw that my changes were used during the autoburt back-up.

Now, if we get an alarm, it's more serious, and we should notify Bubba.

Updated fmcs.alhConfig File

Mainly updated the Guidance windows to show Bubba as the primary contact.  Updated this file, tested, and committed to the svn per instructions, here.