Reports until 18:13, Tuesday 17 April 2012
X1 SUS
james.batch@LIGO.ORG - posted 18:13, Tuesday 17 April 2012 - last comment - 08:10, Wednesday 18 April 2012(2634)
Changed BIOS settings on tripleteststand, changed IOP model. 
Changed BIOS settings on tripleteststand to settings required for front-end computers running RT code. CPU max times on models seems to be holding steady within allowable limits.

Changed x1ioptriple.mdl to get rid of duplicate channel names that were in conflict with the quad test stand.
Comments related to this report
stuart.aston@LIGO.ORG - 08:10, Wednesday 18 April 2012 (2636)
Link 

Following the power down of the triple test stand this evening at around 5:45pm (local) everything came back up, including the model and frame builder.

For a short while, everything looked good on the medm screen i.e. no test point entries showing. However, a little while later the status indicator turned red showing 0x1 and the test point entries started to reappear again. 

I can confirm that the CPU utilisation stabilised completely.