(Covering for Nutsinee)

15:43 UTC Joe D. to LVEA to check batteries
15:47 UTC Jeff B. to LVEA to take pictures
15:52 UTC Jason to PSL enclosure
15:54 UTC Corey and Jim W. to HAM6 for ISI work
16:13 UTC Nutsinee to HAM6
17:03 UTC Karen and Chris moving from end Y to end X
17:06 UTC Gerardo to LVEA, H2 vacuum diagonal
17:11 UTC Jeff B. done in LVEA
17:38 UTC Corey done at HAM6. Nutsinee, Jeff K, Jim W. at HAM6 running B&K hammer before measurements related to tuned mass dampers
18:01 UTC Karen and Chris leaving end X
18:09 UTC Kyle to LVEA to remove and replace vibration isolators on vertex turbo pump by HAM5 (WP 5816)
18:54 UTC B&K hammering team out for lunch
19:25 UTC Vern to TCSX table
20:13 UTC Jeff K. and B&K hammering team back in
20:20 UTC Jeff B. and Mitchel to PSL enclosure to work on plumbing for dust monitors
20:26 UTC Joe D. to LVEA
20:30 UTC Nutsinee to HAM6
20:35 UTC Nutsinee back
20:49 UTC Richard and Gerardo to X2-8 to work on ion pump high voltage cable
21:07 UTC Nutsinee to HAM6
21:30 UTC Dick G. to LVEA ISC racks to retrieve lab book
21:53 UTC Corey to HAM6 to drop off tools
22:37 UTC Richard and Gerardo back