Fairly busy full day of Maintenace today.  The HPO work continues.  The hope is for beam to be back tomorrow.

Day's Activities

• 15:12utc (8:12am) Moving Dust Monitor, removing vacuum tubing for Dust Monitors, WP5822, and Dust monitor work throughout day (Jeff, Mitch)
• 15:13 Rebooting nuc0 & 7 (carlos)
• 15:25 MX liquid nitrogen arrival.
• 15:30 Japanese News Crew on site, WP5819 
• 15:30 Cleaning of EX & EY for next 1.5hrs (Christina/Karen)
• 15:40 EY to put in wedge in CP7 valve (Gerardo)
• 15:50 PSL photodiode investigation (PeterK & Jason)
• 15:57-19:50 EY vacuum transition work to Beckhoff, WP5822 (Richard, Fil)
• 16:03 HEPI rounds & seismometer check (Hugh)
• 16:13 Checking manlift/forklift batteries in LVEA (Joe D)
• 16:22 Snow Valley here for work at end stations, electrical maintenance on chillers  (John W contacted)
• 16:25 MY liquid nitrogen arrival; Kyle notified for set point adjustments.
• 17:15 BRS work at EY (Krishna & Michael)
• 17:20 Keita out to ISCT1 to check on PZT hardware
• 17:24 Adding filter to PI models (Ross, Tega, Dave B)
• 17:49 Paradise water
• 18:21 King Soft for samples
• 18:34 All out-buildings for Vacuum tasks (Kyle)
• 18:35 Japanese film crew in LVEA (Keita)
• 19:04 In-house vacuum cleaner discovered left running at MX.  Kyle turned it off.
• 20:00 Cheryl undamping IMs for free swing data over night WP5824 (Cheryl)
• 20:04 BRS Hardware check (Krishna, Michael)
• 20:07 Unplugging batteries (JoeD)
• 20:20 Restarting Beckhoff at EX (Patrick)
• 21:04 BRS team back out to EX for coding
• 21:15 EY Vacuum stuff continue (Richard & Fil)
• 21:16 HAM6 offset investigations (Jenne)