TITLE: 04/19 Day Shift: 15:00-23:00 UTC (08:00-16:00 PST), all times posted in UTC
STATE of H1: Planned Engineering
INCOMING OPERATOR: Nutsinee
SHIFT SUMMARY:
LOG:

• 14:10 - Chris S to X arm beam sealing at quarter mark.
• 14:45 - Jeff B to diode room to install dust monitors.
• 15:10 - Peter to PSL enclosure.
• 15:13 - Christina, Karen to EX, EY cleaning.
• 15:22 - Hugh to outbuildings for general HEPI checks.
• 15:34 - Joe to LVEA to check batteries.
• 15:37 - Kyle to LVEA removing pumbing from turbo on HAM6.
• 15:58 - Richard, Fil to MX to install vac lines.
• 16:04 - Norco Delivery.
• 16:13 - Jason in to join Peter.
• 16:34 - Joe out.
• 16:37 - Cintas at gate.
• 16:46 - John, Chandra to EX and EY to check on actuators on CP7 and CP8.
• 16:48 - Chirstina, Karen going from EX to EY.
• 17:00 - TJ starting charge measurements.
• 17:44 - Kyle out.
• 17:46 - Christina, Karen leaving EY.
• 18:04 - Joe to mids and ends to restock first aid.
• 18:05 - Ed M to LVEA for a measurement.
• 18:10 - Jeff B to LVEA to remove old dust mon equipment.
• 18:12 - Kyle to LVEA to get more numbers.
• 18:19 - Ed M out.
• 18:40 - Kyle out.
• 18:53 - Jason, Peter out for lunch.
• 19:11 - Joe back.
• 19:53 - Jeff B opening up roll up door.
• 20:15 - Gerardo, Patrick to MX.
• 20:19 - Chandra, John to EX then EY to work on the actuators previously mentioned.
• 20:20 - Peter, Jason back into PSL enclosure.
• 20:17 - Kyle to EX then EY to grab a few part numbers in VEAs.
• 20:27 - Jeff B to Ends for dust flow check.
• 20:35 - Joe into LVEA battery check.
• 20:50 - Gerardo, Patrick back.
• 20:51 - Keita, Ed M to LVEA to recenter ITM OpLevs.
• 20:53 - Joe out.
• 21:02 - Bubba, Chris LVEA craning.
• 21:05 - Jeff B to diode room.
• 21:42 - Richard, Fil to EX for CP8 actuators.
• 22:16 - Jeff B out. Done for the day.
• 22:31 - Bubba, Chris out.