All time in UTC:

23:23 Kyle to EY VEA to write down some serial number.

23:26 Peter and Jason out.

23:46 Jenne and Ross to ISCT6

            Kyle's back

01:49 Noticed H0:FMC-EY_CY_H2O_PUMPSTAT alarm went off. Shortly after got an alarm for high temperature at EY. I called John. Timeseires of this channel around the time it went bad is attached below. The chiller went down at 1:13 UTC and back at 01:52 UTC when John turned the pump back on.

02:10 Ran the random walk script on PSL rotation stage so I can calibrate the calculated power and angle for Stefan.

02:26 Realized that I should have called and check with Jason. Turns out there's a beam dump on IOT2L that can only handle low power according to Cheryl's alog. The full power will go to the table if the IMC is unlocked. I stopped the script right away and asked for the RS to go to minimum power.

03:45 We deciede to call it a night. ALS guardian is complaining about communication issue and beat note strength. ISS is still acting up. IMC is left locked and power into the IMC is 1.9 W.

            In CDS land: H1:DAQ-FW1_UPTIME_SECONDS went white, came back for a while and went white again. I tried call Dave but no one answered.

            H1:VAC_MX_X1_PT_343B_PRESS_TORR alarm went off a couple times.

I also tried to fit the few data points I got from PSL rotation stage random walk script. I've attached a screenshot (second attachment). Parameter A and D seems to be hard coded and couldn't be overwrite on the medm screen (and caput) so nothing's changed.