Today:
With Jason on the IAS EQ, I finished the fine alignment of the ITMy chains in pitch and yaw. This required knocking the reaction chain top stage blades to swing it into yaw tolerance.  Jason will likely post numbers tomorrow.

With Garcia, I centered up all 20 OSEMs. 

Closed the ring heater.

Finished adding the test mass EQ stops and brackets.

Handed off the SEI to unlock the ISI.

Garcia may run a TF overnight to make sure we're not rubbing anywhere.  Tomorrow, after SEI finishes fussing about their minor weight issue (ehem), Jason will take a final look at the fully floating SEI/SUS BSC8 assembly for any last minute alignment tweeks.