Optics Table Helicoiled

(Corey, Eric, Mitchell)

The table has had all of its helicoiled installed.  Broke the tangs, and inspected for tangs in blind holes (may want to do another once over of this before table is installed).

Stage0 On Asssembly Stand

(Corey, Mitchell)

This plate was unwrapped and put on Assembly stand (next up:  helicoiling, Stiffener installation, Support installation).

Misc Work

- Pallet of parts for HAM6 are in Staging & ready. 

- Have started Actuator assembly (need to remove some helicoils from some Actuator plates--not a trivial task)