Balancing HAMISI #5 & Setting Locker Shims

(Corey, Jim)

Did our first run at balancing HAMISI #5.  While doing this, we set the shims for the Lockers.  These are the thicknesses of the shims we used:

Corners

• A:  120"
• B:  120"
• C:  121"
• D:  122"

Stage0 Helicoiling

Eric started helicoiling this plate.

Misc

Completed (1) Actuator (not able to continue due to missing Ag-plated hardware).

Completed assembly of (6) Position Sensor Targets.

Eric put shielding on HAMISI $5 Position Sensor cables