Jim, Dave:

Thursday afternoon and this morning we brought the Staging Building SUS test stand back to life. The front end machine (bscteststand2) and its IO Chassis started with no problems. Most of our work was in getting the workstation running to permit DTT and DATAVIEWER to run. The original SUS workstation, which used to be in the office area, has been repurposed. We located the old SEI workstation in the DTS and pressed that into SUS service. In order to run the workstation outside of the clean area but not in the office, we have temporarily setup in the communications closet. Next week when the area behind the large roll-up door becomes available we will move the workstation there to avoid the closet's cooling issues.

Originally a NAT router (bisbee) in the FEC rack was connected to the GC switch via a wall outlet. We have decommissioned the NAT router, and used the ethernet run to the closet as the way of hooking the workstation up to the iMac and the FEC. We will not be replacing the NAT router, this test stand will no longer be accessible from GC.

Next week Betsy will be able to use the iMac in the clean room to X-foward DTT sessions running on the workstation.