I have built a 24-hour version of SenseMonitor on the redundant machine
(h1dmt2) and it is apparently running now. I also modified it to
initialize the dmtviewer time series from the minute trends (this should
get rid of the errors that showed up every time the dmt was shut down
without stutting down SenseMon cleanly in advance). This version is
available right now as the SenseMonitor_rhoft_H1 monitor. If it looks
like it is working well, I will make this version the default.

A few notes:
 a) as of now, the the rhoft version will not come back without a little
fidgeting. Let me know it stops working.
 b) because of (a) it would be good to get a definitive statement about
whether this is what is desired so I can install the modified code.
 c) Jim requested that the _CAL_ version be modified but I changed the
_hoft_ version. This was purely for ease of testing. Once I install the
new executable, all versions will be 24hours. If you want some to be 24
and some to be 12 hours, I can fix that by juggling configurations.
 d) Yes, Chris and Vern, This means that I can now start up a BBH SenseMon.