Title:  06/10/2016, Day Shift 15:00 – 23:00 (08:00 – 16:00) All times in UTC (PT)
State of H1: IFO unlocked. ITMX ISI Stage 2 WD tripped. ETMX RMS WD tripped. 
Commissioning: 
Outgoing Operator:  None
 
Activity Log: All Times in UTC (PT)

14:48 (07:48) Reset ITMX ST-2 WD trip.
15:00 (08:00) ETMX RMS WD tripped. 
16:16 (09:16) Kyle – Going to Mid-Y for CP3 fill
16:21 (09:21) Richard – Going to End-X to work on RMS WD
16:30 (09:30) Kyle – Back from Mid-Y
16:36 (09:36) Ed – Going to Mid-Y to look for test board
17:04 (10:04) Ed – Back from Mid-Y
17:05 (10:05) Richard – Back from End-X – The RMS WD has been reset
17:35 (10:35) Karen – Cleaning the H2 building 
17:37 (10:37) Richard – Going to End-Y CER
17:48 (10:48) Richard – Finished at End-Y
19:15 (12:15) Sheila & Ed – Going into squeezer bay looking for electronics
19:34 (12:34) Sheila & Ed – Out of LVEA
20:39 (13:39) Ed – Going to Mid-Y
23:00 (16:00) Turn over to Travis


End of Shift Summary:

Title: 06/10/2016, Day Shift 15:00 – 23:00 (08:00 – 16:00) All times in UTC (PT)
Support: Jenne, Sheila, Jim, TJ
Incoming Operator: Travis

Shift Detail Summary: Reset ITMX ISI St-2 WD. ETMX RMS WD is tripped. Per aLOG entries tried toggling the Reset from 1 to 0 back to 1. No change. Cannot lock X-Arm until this is cleared. RMS WD is reset. Did an initial alignment, and started trying to lock. Commissioners continue working through various locking problems