Working with Josh and Robert, I installed a new h2peml0 model to conform to the new PEM channel naming scheme. The new channels names for the LVEA are shown below

[H2:PEM-CS_SEIS_LVEA_FLOOR_X_DQ]
[H2:PEM-CS_SEIS_LVEA_FLOOR_Y_DQ]
[H2:PEM-CS_SEIS_LVEA_FLOOR_Z_DQ]
[H2:PEM-CS_TILT_LVEA_FLOOR_T_DQ]
[H2:PEM-CS_TILT_LVEA_FLOOR_X_DQ]
[H2:PEM-CS_TILT_LVEA_FLOOR_Y_DQ]