Reports until 07:03, Tuesday 28 June 2016
LHO VE
kyle.ryan@LIGO.ORG - posted 07:03, Tuesday 28 June 2016 - last comment - 08:17, Tuesday 28 June 2016(27998)
CP5 level control amis 
Found that the PI output for CP5 was 0% even though the pump level is at 83% -> I switched CP5 to manual control with LLCV %open of 90% -> The other vacuum group members have been experimenting with CP5 of late so I'll "stay out of the kitchen" and let them continue/investigate.
Comments related to this report
kyle.ryan@LIGO.ORG - 07:35, Tuesday 28 June 2016 (27999)
Link 

Changing to 35% while transfer line cools -> Need to do stuff in other room and will monitor exhaust pressure sporadically.
john.worden@LIGO.ORG - 08:17, Tuesday 28 June 2016 (28000)
Link

Back to PID at  08:00 as the PID output had risen to 90%.