Displaying report 1-1 of 1.
Reports until 14:46, Tuesday 05 July 2016
LHO VE
patrick.thomas@LIGO.ORG - posted 14:46, Tuesday 05 July 2016 - last comment - 15:06, Tuesday 05 July 2016(28167)
Updated Beckhoff vacuum controls code 
The code on each Beckhoff vacuum controls computer has been updated to incorporate the new PI controller. All of the cryopumps are back on PID control. TJ and I turned back on the ESD high voltage at end X and end Y. Dave has updated the DAQ. This completes WP 5972.
Comments related to this report
patrick.thomas@LIGO.ORG - 15:06, Tuesday 05 July 2016 (28169)
Link 

The PT100 cold cathode is no longer forced on. Since Gerardo changed the wiring it should no longer need to be. (alog 28024)

I noticed that the PT110 cold cathode stays on whether or not it is requested to be. I can't recall if this was hardwired to remain on?
Displaying report 1-1 of 1.