Title:  07/14/2016, Day Shift 15:00 – 23:00 (08:00 – 16:00) All times in UTC (PT)
State of H1: IFO unlocked. Relocking not successful. Need to do initial alignment.   
Commissioning: 
Outgoing Operator:  None
 
Activity Log: All Times in UTC (PT)

15:00 (08:00) Start of shift
15:23 (08:23) Bubba – Driving in desert between the arms "to look at stuff"
15:51 (08:51) Bubba – Back from drive in desert
16:00 (09:00) Robert – End-Y electronics bay
16:05 (09:05) Kyle – Going to Mid-Y and Mid-X for vacuum work
16:40 (09:40) PSL tripped – Called Peter
17:10 (10:10) Peter & Ed – In PSL to diagnose oscillator & check alignment (WP #5996)
18:06 (11:06) Dave – Restart FR0
18:07 (11:07) Dan – Going into the CER to make PEM measurements
18:30 (11:30) Filiberto & Dan – Going into the CER
19:15 (12:15) Robert & Filiberto – Out of the CER
20:00 (13:00) Robert – Going to End-Y
20:15 (13:15) Robert – Out of End-Y 
21:43 (13:43) Robert – Going to End-Y
23:00 (16:00) Turn over to Nutsinee 

End of Shift Summary:

Title: 07/14/2016, Day Shift 15:00 – 23:00 (08:00 – 16:00) All times in UTC (PT)
Support: Peter, Sheila, Ed,   
Incoming Operator: Nutsinee 

Shift Detail Summary: Started locking. Problem getting past DRMI_1F. Run initial alignment. 
Having trouble getting through initial alignment SRC_ALIGN step.
Restart initial alignment. While doing the INPUT_ALIGN step, laser tripped off. 
Peter reset the laser, checked and adjusted PMC alignment.
Now during INPUT_ALIGN stops at LOCKING_XARM_IR. While here, the ICM will break lock and the Guardian restarts the INPUT_ALIGN. Sheila fixed the INPUT_ALIGN problem. Completed INPUT_ALIGN of the initial alignment.  
Commissioners working on the locking sequence.