Replaced the analog camera looking at the BS with a GigE camera. Camera 29 on the MEDM. Ran the network cable from the camera to SUS-R2 Patch panel port 5. This is a run to the CER. In the CER plugged the unit into port 35 on the network switch. We have a view that will need to be refocused when the IFO relocks. Also have the illuminator on so we have a better view. This needs to be unplugged at the illuminator.
The analog gain was increased to a high value of 1023 (from a default value of 100) and an aperture mask with a radius of 200 pixels was applied. An example image after these adjustments are seen in the attached.