Carl, Dave:

This morning we installed the latest SUS PI model changes. The new system uses a brand new model (h1susprocpi) on the h1oaf0 machine to run additional signal processing. Ideally this model should be located on the h1lsc0 machine, but this currently does not have any spare cores whereas h1oaf does. We may upgrade h1lsc0 to a faster 10-core machine and move the model at a later time.

Additional Dolphin channels have been added to send channels between h1susprocpi and h1omcpi, h1omc, h1susitmpi. At the RFM IPC level nothing is changed, only corner station dolphin mods.

The models changed are: h1susetmxpi, h1susetmypi, h1pemex, h1pemey, h1omc, h1omcpi, h1susitmpi and h1susprocpi (new)

The details of h1susprocpi:

front end = h1oaf0

rate = 2048Hz

dcuid = 71

cpu-num = 5

DAQ was restarted to resync to the new models.

Still to do:

Dave: add new model to overviews and CDS, set SDF to monitor everything, make OBSERVE.snap a link to safe.snap

Carl: create and load all filters