Status:  Discussed smoke from nearby fires.  DetChar F2F starts this morning.  HAM6 vent plan for the week--most likely crack bolts on HAM6 on Tues, BUT we will only start this work when we confirm no dust/smoke issues in the LVEA.

Due to upcoming vent work, we did not go through status of the SEI & ISI.

Bake RGA at end station might start today (Kyle)

HAM6 ISI:  should be isolated or atleast damped (see Hugh)

For Tuesday Maintenance:  Timing work and PI model work were mentioned as primary tasks.  PSL work will cover Mon/Tues per work permit.

For any tours, please remember to fill out a work permit & check with the operator as to whether it is OK (if there is active work in an open chamber we may want to limit tours at that time.)

Visitors This Week:  DetChar people, visitors from China (Fred), KAGRA visitors for PCal (Kiwamu), Krishna/Micahel from UofWA (Hugh)