WP 6073

I updated h0vaclx to change PT110 to a BPG 402 Inficon gauge. This required restarting the TwinCAT3 software and the EPICS IOC. I burtrestored the IOC to midnight yesterday. I also took the opportunity to enable and set the low trip point for PT110, PT170 and PT180 to 1E-5:

(800E:02) Low Trip Point Enable TP1: TRUE
(800E:14) Low Trip Point Limit TP1: 1E-5
(800F:02) Low Trip Point Enable TP2: TRUE
(800F:14) Low Trip Point Limit TP2: 1E-5

The following channels were removed:
H0:VAC-LX_Y0_110_PIRANI_INTLK
H0:VAC-LX_Y0_110_PWR_REQ
H0:VAC-LX_Y0_HS110_PWR_CTRL
H0:VAC-LX_Y0_PT110A_PRESS_TORR
H0:VAC-LX_Y0_PT110A_PRESS_TORR_ERROR
H0:VAC-LX_Y0_PT110A_PRESS_VOLTS
H0:VAC-LX_Y0_PT110A_PRESS_VOLTS_ERROR
H0:VAC-LX_Y0_PT110A_PRESS_VOLTS_SMOO
H0:VAC-LX_Y0_PT110B_PRESS_LOGTORR
H0:VAC-LX_Y0_PT110B_PRESS_LOGTORR_ERROR
H0:VAC-LX_Y0_PT110B_PRESS_TORR
H0:VAC-LX_Y0_PT110B_PRESS_TORR_ERROR
H0:VAC-LX_Y0_PT110B_PRESS_VOLTS
H0:VAC-LX_Y0_PT110B_PRESS_VOLTS_ERROR

The following channels were added:
H0:VAC-LX_Y0_PT110_ERROR
H0:VAC-LX_Y0_PT110_INFODATA_STATE
H0:VAC-LX_Y0_PT110_MOD1_OVERRANGE
H0:VAC-LX_Y0_PT110_MOD1_PRESS_TORR
H0:VAC-LX_Y0_PT110_MOD1_PRESS_TORR_ERROR
H0:VAC-LX_Y0_PT110_MOD1_SENSOR
H0:VAC-LX_Y0_PT110_MOD1_TRIP
H0:VAC-LX_Y0_PT110_MOD1_UNDERRANGE
H0:VAC-LX_Y0_PT110_MOD1_VALID
H0:VAC-LX_Y0_PT110_MOD2_OVERRANGE
H0:VAC-LX_Y0_PT110_MOD2_PRESS_TORR
H0:VAC-LX_Y0_PT110_MOD2_PRESS_TORR_ERROR
H0:VAC-LX_Y0_PT110_MOD2_SENSOR
H0:VAC-LX_Y0_PT110_MOD2_TRIP
H0:VAC-LX_Y0_PT110_MOD2_UNDERRANGE
H0:VAC-LX_Y0_PT110_MOD2_VALID
H0:VAC-LX_Y0_PT110_WCSTATE_TOGGLE
H0:VAC-LX_Y0_PT110_WCSTATE_WCSTATE