BSC6 Activities

• Keita spent first part of morning investigating TMS mis-alignment (Hugh confirmed it was NOT ISI/HEPI-related). 
• VEA was then transitioned to LASER SAFE after his work. 
• Doug/Jason continued alignment work in the afternoon

Misc

• Dave rebooted h2DAQ just after 8am
• CP1 was filled via Praxair
• EY Dust Monitor alarmed for one cycle (100-200 counts).  After this alarm,noticed a "red box" around this dust monitor on the medm screen.  The box was red because there is a "calibrate failure".  Patrick said that if the status doesn't change, this dust monitor will need to be swapped out.