Commissioners (Jenne, Terra, and Sheila) worked on H1 addressing ISS 3rd loop earlier, PRM spot servo, and then with some longer high power locks toward the end.

Notes from the evening:

• CP4 testing is causing an overfill alarm, but Chandra is aware and expects it to stop later tonight (this has been railed at 100% the entire shift).
• PRM beam spot servo work (Jenne, & Sheila)
• 16:30 4th Friday tour (Landry & Kissel)
• 17:44:  3rd Loop check (Sheila)
• Shift ended with Jenne doing ASC work at high power.
• During a nearly 3hr long shift, toward the end of it, several PI modes rung up & they could not be appeased.  

General Operataor note regarding DRMI alignment:  Due to a few DRMI locklosses, stopped at LOCK_DRMI_1F and tweaked on usual suspects:  BS, PR3, PRM, IM4, & SRM (for my session, the BS & PR3 were the only optics to help out).  Then locked up the DRMI with no issue.