After one of the locklosses in the morning the IMC would not relock. Clearing some of the IMC WFS DOF histories brought it back. I often had to adjust the BS in pitch to lock on DRMI. At some point the X arm alignment ended up such that engaging the WFS would drive the green alignment off. Jenne and I trended the optical levers back for ITMX and ETMX and tried bringing these optics back to those values. This did not seem to help so Jenne suggested that I go through an initial alignment. I did and was able to lock both arms on green without difficulty after that. After the initial alignment we kept losing lock engaging the DRMI ASC loops. Jenne and I stopped at LOCK_DRMI_1F and minimized the ASC loop error signals by hand. Eventually this allowed us to move on. 16:26 UTC Betsy to LVEA west bay 16:31 UTC Kyle to LVEA to take RGA scans 16:51 UTC Betsy done 17:48 UTC Kyle back, not able to take RGA scans 18:51 UTC Chris sending excitation to ITMX 18:53 UTC Kyle back 20:14 UTC Chris sending excitation to ITMX 21:40 UTC Kyle retrieved computer from LVEA 21:49 UTC Starting initial alignment 22:14 UTC Done initial alignment 22:42 UTC Kyle to mid Y to fill CP3