1. I can't use the stand up desk because OPSWS12 won't bring up dataviewer and moving screens is so delayed that I can't put them where I want them
2. on ther OPS workstation, dtt has an error I've neer seen before, I've manually set the range for the X axis on two plots and get different actual range on the coherance plot
   1. the top plot starts at 121 and ends at 700 as I've requested
   2. the bottom plot starts below 121, and ends at what looks like 760, when I asked for 121 to 700

I had to set the bottom plot to "transfer function" and back to coherance to get the X axis to start at 121 and end at 700