• After TCSY LASER was reset and the chiller was filled back up the LASER was restarted properly and Sheila and Patrick were able to finish the PRMI alignment they were working on.
• @~ 09:00UTC, PI mode 26 (usually rings upand down on it's own, climbed as high as ~400cts and stayed there only decreasing slightly over a long period of time. This has been the tone of the shift since. I'm letting this mode ring down by itself while manually adjusting the power slowly.
• Dust alarms for 300nm are going off in the LVEA and both Ends.

11:26UTC I'm still increasing power manually. PI mode 26 seems pretty buried at this point.

11:27 OMC DCPD Saturation - lockloss; SUS OMC and HAM6 ISI WD tripped.