Trends for the ETMY ESD which switched off at 11:59 UTC this morning after being sent a large drive signal and immediately broke lock. Off and on switching is seen in ETMY_BIO_L3_MON and drive spike in ETMY_L3_ESDOUTF (LL quad only shown, but its seen in all). DIAG_MAIN reported driver off; it watches an ETMY HV ESDAMON DC_IN monitor. Seems to have turned back on 2 minutes later during LOCKING_ALS. Drive spike was not pushed through PI drive. PI Mode26 damping troubles were unrelated (discussed in later log).