The following are some loose items in the PSL installation, largely in infrastructure:
-
Access control communication between H1 LAE and H1 diode room
-
Replace chiller hoses in the chiller room
-
Check anteroom airflow and overpressure
-
iMacs and mac minis need to go to CDS network. Ubuntu needs to be installed on them as well
-
Dust monitors without internal pump need to be installed
-
Alarms need to be created
-
CDS POE network switch needs to be set up
-
Install external TV
-
Get environmental signals into DAQ
-
Set up final configuration power/rf supplies (cables need to be run too)