Per Sheila's request, we just reduced ITMY ring heater 1.25 W --> 0.25 top, 1.25 --> 0.25 bottom at 14:16 UTC.
The CO2 settings were also reverted to the values that we used to use before the ring heater tuning started. Here is a summary.
To implement this change, I have edited the following guardians.
I did not get a chance to check the contrast defect in the simple Michelson configuration yet.
The CO2 settings were also reverted to the values that we used to use before the ring heater tuning started. Here is a summary.
To implement this change, I have edited the following guardians.
I did not get a chance to check the contrast defect in the simple Michelson configuration yet.