Displaying report 1-1 of 1.
Reports until 11:20, Thursday 27 October 2016
LHO VE
chandra.romel@LIGO.ORG - posted 11:20, Thursday 27 October 2016 - last comment - 16:50, Thursday 27 October 2016(30931)
CP4 in manual mode for now 
Running some experiments with CP4 RE: noise. Set LLCV at 29% open in manual mode with bypass exhaust valve closed to see if signals settle down.
Comments related to this report
chandra.romel@LIGO.ORG - 15:33, Thursday 27 October 2016 (30941)
Link 

I reset the offset in PID to 32 (was 40) which is closer to nominal value after Dewar fill. I also adjusted the lower limit % open from 20 to 25 to avoid warming transfer line, since the LLCV likes to sit at lower limit in PI mode.
Images attached to this comment
chandra.romel@LIGO.ORG - 15:50, Thursday 27 October 2016 (30942)
Link 

Comparing CP4 pump level in manual mode from June and now. Today is much noisier than back in June.
Images attached to this comment
chandra.romel@LIGO.ORG - 16:50, Thursday 27 October 2016 (30946)
Link 

Here is CP3 trend before it failed last Dec.
Images attached to this comment
Displaying report 1-1 of 1.