TITLE: 11/24  EVE Shift: 0:00-08:00 UTC (16:00-0:00 PST), all times posted in UTC
STATE of H1:  PEM Calibration
INCOMING OPERATOR: Nutsinee
SHIFT SUMMARY:

PEM Injections for the 2nd part of the shift.  Range was not the best (i.e. around 60Mpc)

LOG:

• Kyle in LVEA adjusting BSC8 Pump
• BRSx is in odd state (see Jim's alog & below).
• 0:10 LVEA Dust#10 MAJOR Dust Alarm
• CP4 sporadic alarms
• 4:13 NLN
  • Difracted power drops from 4 down to 1 around DRMI.  So tweaked back up to around 4 via RefSignal slider.
  • Ran A2L
  • Closed REFL & ASAIR Beam Diverters (POP remained open) for PEM Injections
• 5:16 Lockloss
• After a lockloss, tried turning ON the BRSx, but it did not damp out after 30+min, so I returned it to DISABLED damping.  SEI CONFIG remains at WINDY_NOBRSX.
• 6:10  NLN & AS+REFL Beam Diverters Closed.  No A2L run.  Waiting for PEM Injections
  • 6:25 Disabled SRC1 p&y and then tweaked the SRM to try and improve range & POP90. (Anamaria from Sheila guidance earlier)
    • Kept SRC1 p&y off (or "open").  If POP90 strays, tweak SRM to minimize it.

New Operator Sticky Notes:

• Injections:  If one occurs over the weekend, please see Dave's instructions (alog31801).
• BRSx is disabled & SEI_Config is in WINDY_NOBRSX state
• CP4 Alarms